The LED Lenser NEO4 is a lightweight head torch designed with running in mind, but is equally as good for hiking, camping, dog walking and many other activities where a lightweight head torch is preferred.
As well as featuring the standard LED Lenser smart light technology, the NEO4 also incorporates a wide beam reflector. This gives the user a wider horizontal illumination for better peripheral vision and the virtually glare free optics combined with the swivel mounted head lamp unit allows you to aim the beam where required and prevents you from dazzling others.
Another safety factor of the NEO4 is the blink function, the forward facing white LED provides blink mode and there is also a rear red LED, enclosed within the slimline battery pack, that will allow you to be seen from behind.
Two modes of either constant current or energy saving are available. Constant current mode will maintain the brightness output until the batteries run out, whereas energy saving mode will gradually decrease the brightness output as the battery level drops.
The small button on the right of the head lamp controls all the functions of the NEO4. Press the button once to turn the light on in constant current mode as default. The light will be on high and the rear red light will stay solid for 5 seconds to indicate you are in constant current mode, after 5 seconds the red light will change to blink. A second press will enter low with rear red blink and a third press will enter white blink with rear red blink. Hold the button down for 1 second in any mode to turn the light off.
To change between constant current mode and energy saving mode hold the button down for 5 seconds with the light off. The light will blink once for energy saving and twice for constant current.
The battery pack houses three AAA alkaline batteries which are concealed by the silicone cover for ease of getting the batteries in and out and also minimises the chances of battery pack failure as there isn't a stiff plastic clasp to pop open like on many other head torches.
When the battery level is low the main light will blink three times to warn the user to replace the batteries. A lockout function prevents accidental activation when not in use and is locked by holding the button down with the light off for 8 seconds and unlocked in the same way.
A chest belt to mount the NEO4 can be purchased separately and is good for night running or group activities so not to shine the light directly at someones face.
Operational Modes (white LED)
High: 240 lumens, 6 hours run-time, 30 m beam range
Low: 20 lumens, 40 hours run-time, 10 m beam range
Blink: 20 lumens, 100 hours run-time, 10 m beam range
Operating Modes: High / Low / White blink / Red blink
Luminous Flux: Up to 240 lumens
LED: 1 x High end power white LED / 1 x rear red LED
Batteries Required: 3 x AAA alkaline (included)
Run Time: Up to 40 hours on lowest setting
Weight: 100 grams (including batteries)
Colours Available: white body with either blue, green or pink detail
Body Material: ABS
Switch Type: Push button
Environmental: Waterproof and dust resistant to IP57 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
NEO4 head torch x 1 (select colour option above)
AAA alkaline battery x 3
Manual x 1